SALF200 ball bearing unit catalogue list
| Dimension | ||||||||||||
| SPEC.1 | Bore dia | a | e | i | g | l | s | b | n | z | Bi | Bolt Used |
| SALF201 | 12(mm) | 81 | 63.5 | 9.5 | 9.5 | 18 | 8 | 56 | 6 | 25.5 | 22 | M6 |
| SALF201-8 | 1/2(inch) | 81 | 63.5 | 9.5 | 9.5 | 18 | 8 | 56 | 6 | 25.5 | 22 | 1/4 |
| SALF202 | 15(mm) | 81 | 63.5 | 9.5 | 9.5 | 18 | 8 | 56 | 6 | 25.5 | 22 | M6 |
| SALF202-10 | 5/8(inch) | 81 | 63.5 | 9.5 | 9.5 | 18 | 8 | 56 | 6 | 25.5 | 22 | 1/4 |
| SALF202-9 | 9/16(inch) | 81 | 63.5 | 9.5 | 9.5 | 18 | 8 | 56 | 6 | 25.5 | 22 | 1/4 |
| SALF203 | 17(mm) | 81 | 63.5 | 9.5 | 9.5 | 18 | 8 | 56 | 6 | 25.5 | 22 | M6 |
| SALF203-11 | 11/16(inch) | 81 | 63.5 | 9.5 | 9.5 | 18 | 8 | 56 | 6 | 25.5 | 22 | 1/4 |
| SALF204 | 20(mm) | 90 | 71.5 | 11 | 11 | 20 | 10 | 61 | 7 | 29 | 25 | M8 |
| SALF204-12 | 3/4(inch) | 90 | 71.5 | 11 | 11 | 20 | 10 | 61 | 7 | 29 | 25 | 5/16 |
| SALF205 | 25(mm) | 95 | 76 | 11 | 11 | 20 | 10 | 64 | 7.5 | 30.5 | 27 | M8 |
| SALF205-14 | 7/8(inch) | 95 | 76 | 11 | 11 | 20 | 10 | 64 | 7.5 | 30.5 | 27 | 5/16 |
| SALF205-15 | 15/16(inch) | 95 | 76 | 11 | 11 | 20 | 10 | 64 | 7.5 | 30.5 | 27 | 5/16 |
| SALF205-16 | 1(inch) | 95 | 76 | 11 | 11 | 20 | 10 | 64 | 7.5 | 30.5 | 27 | 5/16 |
| SALF206 | 30(mm) | 113 | 90.5 | 12 | 12 | 22.5 | 12 | 76 | 8 | 34 | 30 | M10 |
| SALF206-18 | 1-1/8(inch) | 113 | 90.5 | 12 | 12 | 22.5 | 12 | 76 | 8 | 34 | 30 | 3/8 |
| SALF206-19 | 1-3/16(inch) | 113 | 90.5 | 12 | 12 | 22.5 | 12 | 76 | 8 | 34 | 30 | 3/8 |
| SALF206-20 | 1-1/4(inch) | 113 | 90.5 | 12 | 12 | 22.5 | 12 | 76 | 8 | 34 | 30 | 3/8 |
| SALF207 | 35(mm) | 122 | 100 | 13 | 13 | 24 | 12 | 89 | 8.5 | 36.5 | 32 | M10 |
| SALF207-20 | 1-1/4(inch) | 122 | 100 | 13 | 13 | 24 | 12 | 89 | 8.5 | 36.5 | 32 | 3/8 |
| SALF207-22 | 1-3/8(inch) | 122 | 100 | 13 | 13 | 24 | 12 | 89 | 8.5 | 36.5 | 32 | 3/8 |
| SALF207-23 | 1-7/16(inch) | 122 | 100 | 13 | 13 | 24 | 12 | 89 | 8.5 | 36.5 | 32 | 3/8 |
Findbearing.com supplies high quality SALF200 ball bearing unit.
Note:
– When the fit between bearing and housing is clearance fit, the outer ring of bearing has locking pin.
– As default structure, there is grease groove on the outer ring of the bearing. No grease groove structure can also be provided upon request.
You might also be interested in our other products:
SBFW200 | SBFX200 | SBLF200 | SBPF200 | SBPFL200 | SBPP200 | SBRFB200
Needle bearing | Cylindrical roller bearing | Self-aligning ball bearing | Split housing
