894 thrust roller bearings catalogue list
| Thrust bearing gaskets series | Dimension | Roll path size | Load Ratings | |||||||||||||
| SPEC.1 | SPEC.2 | Seat ring | Shaft ring | DC1 d | D1 | Dc | d1 | T | Dw | B | r | Eb | Ea | C | C0 | Limiting speed |
| 89412 TN | K89412 TN | GS89412 | WS89412 | 60 | 62 | 130 | 130 | 42 | 14 | 14 | 1.5 | 65 | 126 | 390 | 1220 | 2500 |
| 89413 TN | K89413 TN | GS89413 | WS89413 | 65 | 68 | 140 | 140 | 45 | 15 | 15 | 2 | 70 | 135 | 445 | 1410 | 2300 |
| 89414 | K89414 | GS89414 | WS89414 | 70 | 73 | 150 | 150 | 48 | 16 | 16 | 2 | 78 | 147 | 450 | 1390 | 2100 |
| 89415 | K89415 | GS89415 | WS89415 | 75 | 78 | 160 | 160 | 51 | 17 | 17 | 2 | 84 | 156 | 500 | 1580 | 2000 |
| 89416 | K89416 | GS89416 | WS89416 | 80 | 83 | 170 | 170 | 54 | 18 | 18 | 2.1 | 89 | 166 | 560 | 1770 | 1900 |
| 89417 | K89417 | GS89417 | WS89417 | 85 | 88 | 180 | 180 | 58 | 19 | 19.5 | 2.1 | 94 | 176 | 620 | 1980 | 1800 |
| 89418 | K89418 | GS89418 | WS89418 | 90 | 93 | 190 | 190 | 60 | 20 | 20 | 2.1 | 100 | 186 | 680 | 2200 | 1700 |
| 89420 | K89420 | GS89420 | WS89420 | 100 | 103 | 210 | 210 | 67 | 22 | 22.5 | 3 | 112 | 206 | 850 | 2850 | 1500 |
| 89422 | K89422 | GS89422 | WS89422 | 110 | 113 | 230 | 230 | 73 | 24 | 24.5 | 3 | 123 | 225 | 1000 | 3400 | 1400 |
| 89424 | K89424 | GS89424 | WS89424 | 120 | 123 | 250 | 250 | 78 | 26 | 26 | 4 | 135 | 245 | 1160 | 4000 | 1300 |
| 89426 | K89426 | GS89426 | WS89426 | 130 | 134 | 270 | 270 | 85 | 28 | 28.5 | 4 | 147 | 265 | 1330 | 4600 | 1200 |
| 89428 | K89428 | GS89428 | WS89428 | 140 | 144 | 280 | 280 | 85 | 28 | 28.5 | 4 | 157 | 275 | 1380 | 4950 | 1100 |
| 89430 | K89430 | GS89430 | WS89430 | 150 | 154 | 300 | 300 | 90 | 30 | 30 | 4 | 168 | 295 | 1570 | 5700 | 1000 |
| 89432 | K89432 | GS89432 | WS89432 | 160 | 164 | 320 | 320 | 95 | 32 | 31.5 | 5 | 179 | 315 | 1780 | 6500 | 950 |
| 89434 | K89434 | GS89434 | WS89434 | 170 | 174 | 340 | 340 | 103 | — | — | 5 | 191 | 335 | 1990 | 7400 | 900 |
Findbearing.com supplies high quality 894 thrust parallel roller bearings.
Note:
– The thrust parallel roller bearing is the one only supporting the axial load in one direction,so they can be used as the bearings with good rigidity and minimum axial occupied space.
– TN=plastic retainer, permissible operational temperature 120 centigrade, 150 centigrade for temporary use, 180 centigrade for short time only.
– The oil should be fully cooled at limit speed with oil lubrication. The permissible value for grease lubrication in 25% of those shown in the list.
– High value can be achieved in appropriate cooling condition.
You might also be interested in our other products:
511 | 512 | 513 | 514 | non-standard Single direction thrust bearing | Thrust Ball Bearing with cover
Needle bearing | Large size bearing | Deep groove ball bearing | Cylindrical roller bearing | Self-aligning ball bearing
